Suzhou Electric Appliance Research Institute
期刊号: CN32-1800/TM| ISSN1007-3175

SUBSCRIPTION MANAGEMENT

发行征订

首页 >> 发行征订 >> 征订方式

基于永磁机构的剩余电流重合闸断路器设计

来源:电工电气发布时间:2021-01-23 15:23浏览次数:709

基于永磁机构的剩余电流重合闸断路器设计

陈悟1,朱菁菁1,朱遵义2
(1 国网江苏省电力有限公司扬州供电分公司,江苏 扬州 225001;
2 南京工程学院, 江苏 南京 211167)
 
摘 要:永磁驱动机构运动部件少、可靠性高,用于剩余电流重合闸断路器是一种创新的探索。介绍了基于永磁机构的剩余电流重合闸断路器工作原理、结构、永磁机构类型及驱动方式的选择,采用
Maxwe Ⅱ软件进行合闸机械特性、分闸机械特性的仿真优化,调整分闸弹簧、触头弹簧,使该产品的触头压力、分断速度达到一个优良的组合。经试验验证,设计的重合闸剩余电流断路器达到了高分断、高可靠、长寿命的设计要求。
    关键词:剩余电流重合闸断路器;剩余电流;永磁操动机构;可靠性
    中图分类号:TM561     文献标识码:A     文章编号:1007-3175(2021)01-0039-04
 
Design of Residual Current Reclosing Circuit Breaker
Based on Permanent Magnet Mechanism
 
CHEN Wu1, ZHU Jing-jing1, ZHU Zun-yi2
(1 State Grid Jiangsu Electric Power Co., Ltd Yangzhou Power Supply Branch, Yangzhou 225001 ,China;
2 Nanjing Institute of Technology, Nanjing 2111 67,China)
 
    Abstract: Permanent magnet drive mechanism has few moving parts and high reliability. It is an innovative exploration to be used inresidual current reclosing circuit breaker. This paper introduces the working principle and structure of residual current reclosing circuitbreaker based on permanent magnet mechanism, the selection of permanent magnetic mechanism type and driving mode. The simulation andoptimization design process of closing mechanical characteristics and opening mechanical characteristics are carried out by using MaxweII software. By adjust the opening spring and contact spring make the contact pressure and breaking speed of the product reach an excellentcombination. Tests have shown that the designed reclosing residual current circuit breaker meets the design requirements of high breaking,high reliability and long life.
    Key words: residual current reclosing circuit breaker; residual current; permanent magnet operating mechanism; reliability
 
参考文献
[1] 咸日常,李其伟,孙学锋,等. 基于状态量监测的电力电容器故障诊断技术的研究[J] . 电力电容器与无功补偿,2018,39(3):21-25.
[2] 俞妍,庞海龙,赵玲,等. 电容器装置中串联电抗器的作用及其选择[J] . 现代电子技术,2012,35(24):182-184.
[3] 葛计彬,平德勇,和立伟,等. 干式空心电抗器异常噪声的分析与对策[J]. 电工电气,2018(8):75-76.
[4] 杨建立,徐政勋,聂京凯,等. 干式空心电抗器温升仿真技术研究[J] . 电力电容器与无功补偿,2019,40(6):68-72.
[5] 戴瑞海,夏晓波,林坚,等. 干式空心电抗器匝间绝缘试验关键技术及装置研究[J] . 浙江电力,2012,31(7):1-5.
[6] 黄新波,周岩,朱永灿,等. 干式空心电抗器匝间短路故障在线监测技术[J] . 电力系统自动化,2019,43(2):150-160.
[7] 霍峰,段长君,周广东,等. 基于无线热点测温法的干式空心电抗器匝间绝缘状态带电诊断方法应用研究[J]. 高压电器,2020,56(2):215-220.
[8] 郑宗安. 基于磁场探测法的电抗器匝间短路故障检测法的研究与应用[J] . 高压电器,2020,56(3):217-223.
[9] 凌云,赵彦珍,肖利龙,等. 高电压大容量干式空心电抗器匝间短路故障在线监测方法[J] . 高电压技术,2019,45(5):1600-1607.