Suzhou Electric Appliance Research Institute
期刊号: CN32-1800/TM| ISSN1007-3175

Article retrieval

文章检索

首页 >> 文章检索 >> 最新索引

基于三菱FX3U系列PLC的盾构电气控制系统设计

来源:电工电气发布时间:2018-12-17 13:17 浏览次数:546
基于三菱FX3U系列PLC的盾构电气控制系统设计
 
张潮1,郭京波1,陈晓阳1,张海东1,周庆祥1,陈建忠2
(1 石家庄铁道大学 机械工程学院,河北 石家庄 050043;2 河北建勘钻探设备有限公司,河北 石家庄 050043)
 
    摘 要:为提高盾构的控制效果和自动化水平,搭建了以三菱FX3U系列PLC为控制核心的盾构控制系统。对PLC的I/O进行配置并设计了相应的控制电路和动力电路,根据设计的硬件电路进行下位机软件的编程和上位机人机界面的开发,制作了动力柜、控制柜和操作台实物。实验结果表明,设计的盾构电气控制系统能够控制刀盘正反转、螺旋机正反转,推进油缸伸缩以及各自的调速,实现对各个数据的处理、采集、报警等一系列功能,达到了预期效果,证明了所设计系统的可行性。
    关键词:盾构电气控制系统;三菱PLC;人机界面
    中图分类号:TP273     文献标识码:A     文章编号:1007-3175(2018)12-0017-04
 
Shield Electrical Control System Design Based on Mitsubishi FX3U Series Programmable Logic Controller
 
ZHANG Chao1, GUO Jing-bo1, CHEN Xiao-yang1, ZHANG Hai-dong1, ZHOU Qing-xiang1, CHEN Jian-zhong2
(1 School of Mechanical Engineering, Shijiazhuang Tiedao University, Shijiazhuang 050043, China;
2 Hebei Jiankan Drilling Equipment Co., Ltd, Shijiazhuang 050043, China)
 
    Abstract: In order to improve the control effect and automation level of shield, this paper established a shield control system with Mitsubishi FX3U series programmable logic controller (PLC) as the control core. The PLC I/O was configured and the corresponding control circuit and power circuit were designed. According to the design of hardware circuit, the software programming and the upper computer interface were developed and the power cabinet, control cabinet and operation table were made. The experimental results show that the design of electrical control system can control the cutter and the screw conveyor positive and negative turns, to boost the oil cylinder flexible and speed governing respectively, so as to realize a series of functions such as data process, collection and alarm etc, which reaches the expected effect and proves the feasibility of the designed system.
    Key words: shield electrical control system; Mitsubishi programmable logic controller; man-machine interface
 
参考文献
[1] 马立明, 李申山. 土压平衡式盾构PLC电气控制系统分析[J]. 筑路机械与施工机械化,2009,26(9):65-67.
[2] 唐健. 盾构可编程控制器(PLC)系统设计研究[J]. 铁道工程学报,2006,23(3):40-43.
[3] 王雪,王守城,郑博,罗力维. 盾构机试验台的PLC控制[J]. 液压与气动,2010(4):61-63.
[4] 王雪. 盾构机试验台控制系统的设计与研究[D]. 青岛:青岛科技大学,2010.
[5] 陈晓阳. 微型盾构试验机液压系统设计及控制[D]. 石家庄:石家庄铁道大学,2017.
[6] 贾雅琼,马笑琪,谢伟. 空气中含碳气体的超声监测装置的设计与实现[J]. 电工电气,2017(5):23-26.
[7] 霍发仁. 人机界面设计研究[D]. 武汉:武汉理工大学,2003.