Suzhou Electric Appliance Research Institute
期刊号: CN32-1800/TM| ISSN1007-3175

Article retrieval

文章检索

首页 >> 文章检索 >> 最新索引

金属覆盖层铜镀银厚度测试方法分析

来源:电工电气发布时间:2021-03-26 10:26 浏览次数:596
金属覆盖层铜镀银厚度测试方法分析
 
张业真,朱翔,徐名中
(福建省产品质量检验研究院,福建 福州 350002)
 
    摘 要:对标准GB/T 16921—2005与国家电网有限公司[2018]979号文件中对金属覆盖层镀银厚度试验要求与规定进行研究,提出在进行金属覆盖层铜镀银测试过程中,会因产品测试点不同部位、不同面、不同角度的变化,对铜镀银层厚度数值出现不一样的结果,对调整测试仪器中的测量距离是否会改变铜镀银层厚度数值进行了分析研究,并给出了在测试金属覆盖层铜镀银产品时应当注意的事项与测试方法。
    关键词:铜镀银层;部位;角度;测量距离
    中图分类号:TM591     文献标识码:B     文章编号:1007-3175(2021)03-0062-04
 
Analysis on the Test Method of Copper Silver Plating Thickness of Metal Cover
 
ZHANG Ye-zhen, ZHU Xiang, XU Ming-zhong
(Fujian Inspection and Research Institute for Product Quality, Fuzhou 350002, China)
 
    Abstract: According to the standard GB/T 16921—2005 and State Grid Co., Ltd. [2018] No. 979, the test requirements and regulations of the silver plating thickness of the metal coating are studied. It is proposed that in the process of testing the copper silver plating of the metal covering layer, different results will appear on the thickness of the copper silver plating layer due to the changes in different parts, different sides and different angles of the product test points, and to analyze and study whether adjusting the measuring distance in the test instrument will change the thickness of the copper silver-plated layer, and give the matters and test methods that should be paid attention to when testing the copper silver-plated product with the metal covering layer.
    Key words: copper silver plating layer; part; angle; measuring distance
 
参考文献
[1] 中国机械工业联合会. 金属覆盖层 覆盖层厚度测量X 射线光谱方法:GB/T 16921—2005[S]. 北京:中国标准出版社,2005 :3-6.